Hydraulic 10 Ton Swing Arm Clicker Press
Ideal for holsters & knife sheaths
- Weight: 1100 lbs filled with oil
- Cutting Bed: 31.5"W x 16"D
- Upper Head size: 13"W x 16"D
- Stroke adjustment: 1/8" to 2-1/8"
- Platen adjustment: .5" to 3.5"
- Power required: 15 amp, 220v Single Phase
- Machine footprint: 32"w x 32"d x 60"h
- Tonnage: 10 ton
- Oil Type: ISO 46 AW Hydraulic Fluid
- Will fit through 3-0 Doorway
- Plug type: NEMA 6-15
Call to see a demonstration at our Dallas location.
CB-10 Hydraulic 10 Ton Swing Arm Clicker Press
The Model CB-10 hydraulic clicker press offers an excellent combination of value and versatility. This clicker press offers a higher tonnage alternative to other lower rated machines in the market, and yet the price of the leather clicker press is very affordable. This hydraulic swing beam clicker press can be used to both emboss leather using an embossing plate and cut leather using steel rule cutting dies.
The CB-10 generates over 10 US tons of cutting pressure. This hydraulic clicker press features a height adjustable beam to accommodate for different thicknesses of die stock as well as an aluminum plate on the underside of the cutting beam which is replaceable.
The CB-10 leather clicker press features a heavy steel frame designed for industrial use cycles. The polypropylene cutting pad on the bed of the machine is easily replaced should it become worn.
The heavy duty hydraulic pump and cylinder of this clicker press is designed for heavy use cycles in an industrial setting. Yet this hydraulic clicker press is priced low enough that it is easily affordable for the small shop owner.
10 tons of continuous cutting pressure ensure that the CB-10 will deliver enough force to use a wide variety of small, medium, and large cutting dies of variable height and thickness.
The die cutting press machine has a fail safe safety mechanism built in using two safety handles. Both buttons must be pressed simultaneously in order for the machine to cycle. This keeps the operator's hands clear of the work.
The comparatively low price of the CB-10 when compared to other smaller tonnage machines in the market makes it an ideal choice for the small shop or manufacturer that is seeking a machine capable of producing higher tonnage than the smaller machines available in this price range. A full 10 tons of power is available with the CB-10 machine at a price that is competitive with much smaller machines.
The CB-10 swing arm hydraulic cutting press runs off of commonly available 220v single phase current. Many clicker presses of this type are made to run on 3 phase current, making them impractical for the small shop owner. The CB-10 hydraulic clicker press is set to run on 220v single phase at no additional charge. Many sellers of these machines charge close to $1000.00 for this upgrade. Try a CB-10 hydraulic swing beam clicker press for your next clicker purchase and allow us to show you the Cowboy advantage today!